|
Jigs
are one of the oldest artificial baits used in angling. The earliest
examples used a weighted hooks with animal hairs or bird feathers
tied to them. The jigs used today are still just that simple, but
come in a wide variety of styles. By adding an assortment of jigs
to your tackle box will make you a much more versatile and consistently
productive bass angler.
Jigs
can be broken down into two general categories; those that are designed
for light-line use, for smallmouth and finesse largemouth bass fishing;
and those designed for the heavier line and largemouth bass in and
around cover.
The
light-line jigs are a lot less bulky than their larger cousins.
The hooks are also a lot smaller. Relatively snag-free conditions
are fished with these jigs, allowing the use of spinning outfits
with 6 to 10 pound (2.7 to 4.5 kg) lines.
Jig
heads come in a large number of varieties, but a few basic styles
are all you really need to get yourself started. The standard ball-head
is a great choice to begin with. However, the banana shaped head
will snag a lot less vegetation in the weedy situations you get
into. Other styles, like the arrowheads, can be used in both situations.
Add to them a new array of sliders, rockers and wobblers are used
mainly by walleye anglers, but horizontally flattened sliders are
useful for fishing over and around shallow bass cover.
One
of the oldest jig dressings is buck tail. When worked properly,
the deer hairs pulsate as the jig is pumped through the water to
resemble a darting minnow or baitfish. There is no built in action
to jigs. The plastic rails are the easiest jigs to use. Their actions
attract bass and can be worked effectively even by the novice angler.
Twister tails, shad tails, twin tails and a host of other shapes
and actions are also available. Stick to these two common types
and you will no trouble attracting those lunker bass.
One
light style is the tube jig, its a split-skirted plastic sheath
that covers the jig head. You can use standard heads with them,
but the newer elongated styles, developed for tubes specifically
are of course best. When using a tube you can also use fish scents
to help attract more bass. Here's a great bass fishing tip, put
a few small chunks of Alka-Seltzer in your tubes the bubbles created
will drive the bass crazy. The bubbles will also attract bass from
a longer distance.
Be sure
to use light jigs for largemouth and smallmouth bass in open-water
situations. When you are fishing in heavy cover, switch to bulkier
flipping jigs with weed guards to help keep them from fouling or
snagging. These baits usually have rubber or plastic skirts and
large hooks. They work great with a pork rind, plastic or one of
the newer trailers. They also add bulk and action and help slow
down the jigs fall to better imitate a crayfish or other creature.
Use flipping jigs when fishing short-range targets, such as docks,
submerged stumps, or holes in heavy vegetation and weed beds. To
pull large bass out of this heavy stuff, use strong bait casting
equipment.
Jigs
come in an assortment of colours. Try to match the forage of the
water body you are fishing. Blacks, browns, and orange are the standard.
When they fail to fool the bass, experiment with the brighter colours,
such as yellow, chartreuse, orange, red, or blue. For clear-water
smallmouth bass the smoke bodies are effective. Just experiment
and get out there and go fishing.
Jack
Phillips has been an avid Canadian angler for over 50 years. Fishing
Canada provides solid advice for walleye, bass, pike, muskie, a
variety of trout, arctic char bass fishing tips and more. Idea's
on when and where to go on your next trip to Canada. Ice fishing
tips. Delicious fish recipes also! Article Source: http://EzineArticles.com/?expert=Jack_Phillips
|